ISL54223,ISL54223IRUZ-T

Part No.:
ISL54223,ISL54223IRUZ-T
Download:
Download
Description:
High-Speed USB 2.0 (480Mbps) Multiplexer
File Size:
781 K
Page:
13 Pages
Logo:
Maker:
INTERSIL [ INTERSIL CORPORATION ]
PCB Prototype

July 16, 2018:

ISL6264CRZ-T

J175

J378B

JS28F128P30TF75A

JTN1ASTMPFDC5V

JTN1STMPDC9V

K-229064-10-1A

L2-R82

L6935TR

LAN83C180

LBW1000

LC242

PCB Datasheet:1PCB Datasheet:1
®
ISL54223
Data Sheet
February 9, 2009
FN6836.0
High-Speed USB 2.0 (480Mbps)
Multiplexer
The Intersil ISL54223 is a single supply dual 2:1 multiplexer
that can operate from a single 1.8V to 3.3V supply. It contains
two SPDT (Single Pole/Double Throw) switches configured as
a DPDT. The part was designed for switching or routing of
USB High-Speed signals and/or USB Full-speed signals in
portable battery powered products.
The 5.5Ω switches can swing rail-to-rail and were specifically
designed to pass USB full speed data signals that range from
0V to 3.3V and USB high speed data signals that range from
0V to 400mV with a single supply as low as 1.8V. They have
high bandwidth and low capacitance to pass USB high speed
data signals with minimal distortion.
The part can be used in Personal Media Players and other
portable battery powered devices that need to route USB
high-speed signals and/or full-speed signals to different
transceiver sections of the device while connected to a single
USB host (computer).
The digital logic inputs are 1.8V logic compatible when
operated with a 1.8V to 3.3V supply. The ISL54223 has an
output enable pin to open all the switches. It can be used to
facilitate proper bus disconnect and connection when
switching between the USB sources.
The ISL54223 is available in a 10 Ld 2.1mmx1.6mm µTQFN
package. It operates over a temperature range of -40 to +85°C.
Features
• High-Speed (480Mbps) and Full-Speed (12Mbps)
Signaling Capability per USB 2.0
• 1.8V Logic Compatible
• Enable Pin to Open all Switches
• Power OFF Protection
• D-/D+ Pins Overvoltage Tolerant to 5.5V
• -3dB Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . 782MHz
• Low ON Capacitance. . . . . . . . . . . . . . . . . . . . . . . . 6.5pF
• Low ON-Resistance. . . . . . . . . . . . . . . . . . . . . . . . . . 5.5Ω
• Single Supply Operation (V
DD
) . . . . . . . . . . . . 1.8V to 3.3V
• Available in µTQFN Package
• Pb-Free (RoHS Compliant)
• Compliant with USB 2.0 Short Circuit and Overvoltage
Requirements Without Additional External Components
Applications
• MP3 and other Personal Media Players
• Cellular/Mobile Phones
• PDA’s
• Digital Cameras and Camcorders
• USB Switching
Application Block Diagram
µCONTROLLER
V
DD
ISL54223
SEL
VBUS
USB CONNECTOR
LOGIC CIRCUITRY
OE
D-
HSD1-
D-
HSD1+
USB
HIGH-SPEED
OR
FULL-SPEED
TRANSCEIVER
#1
D+
D+
HSD2-
HSD2+
GND
GND
USB
HIGH_SPEED
OR
FULL-SPEED
TRANSCEIVER
#2
PORTABLE MEDIA DEVICE
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.